Denafrips Terminator Plus 15th - R2R DAC
Denafrips Terminator Plus 15th - R2R DAC
TERMINATOR-PLUS 15TH
Featuring a new-generation circuit architecture, enhanced with flagship-level technology, the system achieves deep and accurate sound reproduction
SPECIFICATIONS
| Description | Parameters |
|---|---|
| R-2R DAC | Proprietary R2R + DSD Architecture |
| True balanced 26BIT R2R + 6BIT DSD (32 steps FIR Filters) | |
| Matched Precision Thin Film 0.005% R-2R Network Arrays | |
| Highlight | Encapsulated Ultra Low Noise Power Supply |
| High-end Oven Controlled Crystals OCXO | |
| Total isolation of Digital and R-2R Boards | |
| Adaptive FIFO Buffer and Reclocking | |
| DSD1024, PCM1536 Supports On USB & I²S Input | |
| Proprietary USB Audio Solution via STM32F446 Advanced AMR Based MCU | |
| Licensed Thesycon USB Driver For Windows Platform | |
| Driverless On Mac & Linux | |
| Dual AES/EBU Input Supports | |
| Sharp/Slow Filters Option | |
| I²S Pinout Configuration | |
| I²S DSD Channel Swap Configuration | |
| DSD | DSD64 / 2.8224MHz (DoP) on Coax/AES/Opt Input |
| DSD1024 / 45.1584MHz * On USB & I²S Input Only | |
| PCM | 24bits / 44.1, 48, 88.2, 96, 176.4, 192KHz On All Input |
| 1536kHz* On USB & I²S Input | |
| Digital Input | Coax via RCA |
| TOSLink x 1 | |
| AES/EBU x 2 (Dual AES/EBU L/R Channel Input Supported) | |
| USB2.0 Type B | |
| I²S via HDMI LVDS | |
| I²S via RJ45 LVDS | |
| I²S via RJ45 LVCMOS | |
| Analog Output | RCA at 2.2Vrms, 625 Ω |
| XLR at 4.4Vrms, 1250 Ω | |
| Sampling Mode | Non-Oversampling NOS |
| Oversampling OS | |
| AC Power Requirement | 100-240VAC, 50/60Hz (Worldwide Voltage) |
| Power Consumption | ≤20W |
| Frequency Response | 20-80KHz (+1/-3dB） |
| THD+N | <0.001%(A) |
| S/N Ratio | ≥127dB(A) |
| Dynamic Range | >132dB |
| Stereo Crosstalk | -110dB |
| Dimension | 385 x430 x 110 mm |
| Weight | 19.15 Kg |
| Color | Silver / Black |
8.939,67 €
8.939,67 €
-
Couleur
-
Marques