Walnut-finished casework and illuminated VU meters give the C 3050 its retro character.
Walnut-finished casework and illuminated VU meters give the C 3050 its retro character. Inside, HybridDigital UcD amplification delivers 100 watts per channel, with digital inputs, HDMI eARC and an MM phono stage for everyday sources. BluOS streaming and Dirac Live require the optional MDC2 BluOS-D module; that module is not included with this standard C 3050.
| LINE INPUT, PRE-OUT | |
|---|---|
| THD (20 Hz – 20 kHz) | <0.005 % at 2V out |
| Signal-to-Noise Ratio | >95 dB (IHF; A-weighted, ref. 500 mV out, unity gain) |
| Channel separation | >100 dB (1 kHz) |
| Input impedance (R and C) | 28 kohms + 360 pF |
| Maximum input signal | >4.5 Vrms (ref. 0.1 % THD) |
| Output impedance | 440 ohms |
| Input sensitivity | 270 mV (ref. 500 mV out, Volume maximum) |
| Frequency response | ±0.3 dB (20 Hz - 20 kHz) |
| Maximum voltage output -IHF load | >2 V (ref. 0.1 % THD) |
| PHONO INPUT, PRE-OUT | |
| THD (20 Hz – 20 kHz) | <0.03% at 2 V out |
| Signal-to-Noise Ratio | >79 dB (200 ohms source; A-weighted, ref. 500 mV out) |
| Input Impedance (R and C) | 46 kohms/100 pF |
| BluOS AUDIO | |
| Sampling rate | up to 192 kHz |
| MAIN IN, SPEAKER OUT | |
| Continuous output power into 8 ohms and 4 ohms | 100W (ref. 20 Hz-20 kHz at rated THD, both channels driven) |
| Power consumption - at Auto Standby ON and Network Standby OFF | 0.5 W* |
| Power consumption - at Auto Standby ON and Network Standby ON | 2.0 W** |
| Power consumption - OFF mode (Power switched OFF) | 0.1 W |
| DIMENSION AND WEIGHT | |
| Gross dimensions (W x H x D) **** | 450 x 127 x 355mm 17 1/4 x 5 x 14 inches |
| Net weight | 10 kg (22 lbs) |
| Shipping weight | 12.6 kg (27.8 lbs) |
| Marques | NAD |
